Lightning Protection

Lightning Protection

The Original nVent ERICO Lightning Protection

Air Terminals

PH35296m

nVent ERICO offers the System 2000 series of air terminals, down-conductors and fittings in accordance with National and International Standards such as the Australian AS1768.

PH39603m

Lightning strike termination points for use with air terminal bases. Includes nut for securing to air terminal base.

PH37837m

The economic and safety implications of lightning can be devastating.  The nVent ERICO Dynasphere air terminal provides a preferred point for lightning discharges which would otherwise strike and damage an unprotected structure and/or its contents. 

Air Terminal Bases

Standard Air Terminal Bases

PH31545m

Unique design accepts multiple air terminal thread sizes.

Roof Ridge Air Terminal Bases

PH2058m

For use on ridged roof. Can be easily formed to accommodate a variety of angles.

In-Line Air Terminal Bases

PH1770m

Tape to air terminal coupler. For use with Air Terminal Bracket.

Through Roof Assemblies

PH2051m

Allows for lightning protection conductors to be concealed in ceiling or walls.

Air Terminal Base, Standing Seam Imperial Thread

PH1856m

For use with standing seam roofing systems. Adjustable cable connector for conductor runs either parallel or perpendicular to the seam.

Cone Air Terminal Base

PH2023m

For use on cone shaped metal surfaces.

Industrial Stack Air Terminal Bases

PH35314m

Cast air terminal base for use with horizontal conductor runs. For use with expansion anchors.

Pipe Mount Air Terminal Bases

PH2901m

Mounts air terminal to horizontal pipe or vertical pipe using Right Angle Extension Adaptor.

Air Terminal Supports

Galvanized Air Terminal Support, Non-Penetrating Base

PH34487m

For use with hot pitch, roofing compound or commercial adhesive on membrane surfaces or other locations where holes cannot be made. Provides additional support for long air terminals.

Galvanized Air Terminal Support Penetrating Base

PH34490m

Provides additional support for long air terminals. Two mounting holes per leg for installation. All joints welded prior to galvanizing.

Tripod Mast Support

PH37103m

Provides additional support for long air terminals or masts. One mounting hole per leg for installation. All joints welded prior to galvanizing.

Air Terminal Bracket

PH32472m

Provides offset mounting point for air terminals. For use with Air Terminal to Tape Connector.

Cable/Point Pipe Support

PH34237m

Clamp for bonding horizontal or vertical pipes to the lightning protection system. May be used as a vertical support for air terminals.

Extended Strap Cable/Point Support

PH2076m

Offset support for air terminals or conductors

Extended Strap Cable/Point to Pipe Support

PH35312m

Offset support for air terminals or conductors

Strap Cable/Point Support

PH35313m

Offset support for air terminals or conductors

Strap Cable/ Point to Pipe Support

PH2077m

Attaches air terminals or conductors to pipe or handrails.

Strap Cable/Point Support

cadweld ignition systems

Masts

Aluminium Masts

PH3084m

Masts for cantilevered installations

ISOnV Masts and Accessories

PH39717m

For use with ISOnV Upper Mast Assembly in vertical cantilever installations. Accommodates up to five ISOnV Insulated Conductors.

Fiberglass Masts and Assemblies

PH3085m

Non-conductive mast section for air terminals using insulated down conductor.

Stainless Steel Masts and Components

PH35420m

Designed to mount Early Streamer Emitter air terminals. Mounts conventional air terminals with appropriate adaptor.

Mast Adaptors

nVent ERICO System 1000 Terminal Adaptors

PH35607m

Connects Early Streamer Emission Terminal to nVent ERICO Ericore upper termination.

nVent ERICO System 2000 Terminal Adaptors

PH36302m

Connects conventional air terminal to ER2 series Stainless Steel Mast.

nVent ERICO System 3000 Terminal Adaptors

PH1630m

Connects nVent ERICO System 3000 air terminals to ER stainless steel upper mast sections.

nVent ERICO System 2000 Terminal Adaptors

molds and accessories for railways

Mast Couplers, Supports & Bracket

Mast Coupler

PH2109m

Connects fiberglass mast to lower aluminum mast.

Mast Support

PH1766m

Used for cantilevered mounting of aluminum or stainless steel masts.

Mast Bracket, Offset

PH2937m

Used for cantilevered mounting of aluminum or stainless steel masts.

Mast Bracket, U-Bolt

PH2091m

U-Bolt assembly for attaching fiberglass mast to aluminum mast

Mast Bracket, X-Shape

PH3404m

For mast-to-mast or pipe-to-mast mounting connections.

Guy Ring

PH2093m

Allows guys to be attached between fiberglass mast and air terminal.

Non-Conductive Guy Kit

PH2087m

Guy wiring and hardware for supporting lightning protection masts.

Guy Ring

molds and accessories for railways

Wind Turbine Lightning Protection

Side Receptor Plug

PH38341m

A fully encapsulated connection from the conductor to the side receptor disk utilizing an engineered thermoplastic material. Offers excellent dielectric strength and a simple mounting method.

Tip Receptor Mount

PH38343m

A fully encapsulated connection from the down conductor to the tip receptor. Offers a standard, insulated connection with excellent dielectric strength for a removable tip receptor.

Side Receptor Socket

PH38344m

Mounting base for the side receptors plug that is built into the blade wall during the manufacturing process. The socket provides a consistent, engineered hole in the blade for the receptor disk.

Tip Receptor Disk

PH38348m

A field replaceable lightning attachment receptor that is resistant to environmental effects.

Side Receptor Installation Tool

PH38359m

Specially designed tool that makes installing the side receptor plug on the opposite side of the blade simple and efficient.

Tip Receptor Disk

molds and accessories for railways

A field replaceable lightning attachment receptor that is resistant to environmental effects.

Get expert advice on our product range.

Get expert advice on our product range.