Rail and Industrial Products
In 1938, Dr. Charles CADWELL, founded the company Electric Railway Improvement Company (ERICO). There is no wonder then why ERICO is the industry leader for rail & industrial products products. Specialising in rail signal bonding, rail clips, rail drilling machines, rail grinders, copper inserts and much more, we can supply various types of connections to meet specific requirements. ERICO’s surge protection products are also widely used in the rail industry in signalling and communication equipment such as the rail transient barriers (RTB) and Triggered Spark Gap Surge Reduction Filters (TSG-SRF). WAPP was appointed by ERICO to be their sole distributor in Perth, WA for their Rail Division.
Over the years, these products have been developed to be used across all industries from mining, oil & gas, construction to infrastructure.
Service time and over 100 million installed bonds prove that the CADWELD Process provides the ultimate in desirable features for railroad signal bonding. ERICO provides an offering of both rail […]
The SLP1 RJ11 is designed to protect sensitive telecommunications equipment connecting to the telephone network via RJ11 plugs. The SLP1RJ11A is A-Tick approved for use in Australia and offers a […]
ERICO has provided the CADWELD range of exothermic welding solutions to numerous cable manufacturers and installers around the world over many decades. CADWELD high voltage cable conductor connections uses a […]
CADWELD® prefabricated impedance bond side leads incorporate a Type W terminal on a flexible length of cable including CADWELD tinned copper lugs.
As an integral part of the System 3000, the screened, insulated ERITECH downconductor conveys the lightning discharge current to ground with minimal danger of sideflashing. The ERITECH downconductor evolved after […]
With almost two decades of successful field application, the ERITECH® System 3000 was enhanced in 2003 with an optimized DYNASPHERE air terminal, ERICORE cable system and supporting design software for […]
The DSD12/24 surge diverter has been designed as a general-purpose transient barrier for the protection of low voltage circuits such as those used in fire and security systems. The narrow […]
A key element in rail bond connections is rail preparation, and the ERICO® rail grinder are designed to assist in this preparation for the best connection to occur.
The DINLINE surge filter is designed for the protection of strategic equipment or those supplying critical applications. As well as providing shunt protection, it filters the clamped waveform to reduce […]
The SBG150 is a gas (petrol)-powered portable rail grinder from ERICO® designed for use with rail steel. The SBG150 allows grinding in tight areas and grinds the head and web […]
CRITEC TDF Series is designed for process control applications to protect the switched mode power supply units on devices such as PLC controllers, SCADA systems and motor controllers. Units are […]
The SBM-V range of petrol/gasoline rail drills are designed for smooth, reliable and powerful drilling operation onto the web of existing rail profiles. Now also available as a 4-stroke machine […]
Rail trackside electrical environments are prone to dangerous and damaging voltage surges and transients, which can be induced onto low-voltage signal and control circuits. These transients can cause erroneous system […]
ERICO’s years of experience in the electrical field encompasses railroad grounding applications. CADWELD Grounding Connections applications: Cable to Ground Rod Cable to Cable Cable to Steel
ERICO provides many rail bonding accessories for both freight/non-electrified and transit/electrified railway systems.
Fits over the drive rod to protect the rod end from mushrooming.
ERICO’s patented Universal Terminal Block is an integral part of the ERICO Protection Panel (EPP) system. The Universal Terminal Block combines existing AAR accepted materials and practices with an advanced […]
To complement our line of bonds, ERICO manufactures numerous types of mechanical bond.
The loadcell protector provides protection to loadcells from lightning induced transients. Experience has shown that the strain gauge bridge is easily damaged by surges or transients. The LCP is well […]
CADWELD CADLOK is a system of connecting copper anode contacts to an aluminum busbar for primary pre-bake aluminum smelting. Traditional MIG welding poses several inherent problems, including the need to […]
ERICO has developed an innovative solution for the testing and troubleshooting of wayside signaling and crossing signal applications. Temporary Rail Bonds from ERICO connect exothermic and mechanical rail connections directly […]
The SK and DSK series of rail contacts provide a high-quality connection to the rail web with a very low contact resistance. ERICO also offers two reliable hydraulic insertion tools […]
The Deutsche Bahn AG and other transport companies all have different requirements for rail drilling technology in the overhead conductor, track laying and signal engineering fields. ERICO’s answer was to […]
The Closed Circuit Television Protector (CCTV12) is designed for the protection of Security Cameras or Closed Circuit TV video circuits including: – Security & traffic cameras – Television monitors – […]
The SBM-E range of electric rail drills is designed for smooth, reliable and quiet drilling operation onto the web of existing rail profiles. Available in both AC mains and DC […]
These surge diverters offer economical and reliable protection from transients on coaxial antenna RF feeders cables. They are comprised of a leadless gas discharge tube (gas arrester) housed in a […]
The CADWELD process is a method of making welded electrical connections of aluminum to aluminum, copper to copper, and copper to steel in which no external sources of heat, such […]
The DEP Series (Equipment Surge Protector) is designed to protect equipment connected to serial protocol systems from the damaging effects of induced surges and transients. The DEP protectors are packaged […]
Regardless of usage and ampacity required, ERICO can provide the materials needed to connect a wide range of cable sizes to a variety of rail types. Our complete line of […]
The Local Area Network Protector (LAN RJ45) suits both 10BaseT and 100BaseT Unshielded Twisted Pair (UTP) Ethernet networks. The unit features simple plug-in installation. State-of-the-art protection technology ensures that high […]
The DSD 1150 series of surge suppressors provide economical and reliable protection to primary distribution panel boards and power distribution systems. They are intended for locations classified for devices tested […]
ERICO’s core state-of-the-art technologies, including Triggered Spark Gap (TSG) and Transient Discriminating (TD) have been combined with efficient low-pass filtering to provide premium performance Surge Reduction Filter Technology.