Lightning Protection
Lightning Protection
The Original nVent ERICO Lightning Protection
Air Terminals
nVent ERICO offers the System 2000 series of air terminals, down-conductors and fittings in accordance with National and International Standards such as the Australian AS1768.
Lightning strike termination points for use with air terminal bases. Includes nut for securing to air terminal base.
The economic and safety implications of lightning can be devastating. The nVent ERICO Dynasphere air terminal provides a preferred point for lightning discharges which would otherwise strike and damage an unprotected structure and/or its contents.
Air Terminal Bases
Standard Air Terminal Bases
Unique design accepts multiple air terminal thread sizes.
Roof Ridge Air Terminal Bases
For use on ridged roof. Can be easily formed to accommodate a variety of angles.
In-Line Air Terminal Bases
Tape to air terminal coupler. For use with Air Terminal Bracket.
Through Roof Assemblies
Allows for lightning protection conductors to be concealed in ceiling or walls.
Air Terminal Base, Standing Seam Imperial Thread
For use with standing seam roofing systems. Adjustable cable connector for conductor runs either parallel or perpendicular to the seam.
Cone Air Terminal Base
For use on cone shaped metal surfaces.
Industrial Stack Air Terminal Bases
Cast air terminal base for use with horizontal conductor runs. For use with expansion anchors.
Pipe Mount Air Terminal Bases
Mounts air terminal to horizontal pipe or vertical pipe using Right Angle Extension Adaptor.
Air Terminal Supports
Galvanized Air Terminal Support, Non-Penetrating Base
For use with hot pitch, roofing compound or commercial adhesive on membrane surfaces or other locations where holes cannot be made. Provides additional support for long air terminals.
Galvanized Air Terminal Support Penetrating Base
Provides additional support for long air terminals. Two mounting holes per leg for installation. All joints welded prior to galvanizing.
Tripod Mast Support
Provides additional support for long air terminals or masts. One mounting hole per leg for installation. All joints welded prior to galvanizing.
Air Terminal Bracket
Provides offset mounting point for air terminals. For use with Air Terminal to Tape Connector.
Cable/Point Pipe Support
Clamp for bonding horizontal or vertical pipes to the lightning protection system. May be used as a vertical support for air terminals.
Extended Strap Cable/Point Support
Offset support for air terminals or conductors
Extended Strap Cable/Point to Pipe Support
Offset support for air terminals or conductors
Strap Cable/Point Support
Offset support for air terminals or conductors
Strap Cable/ Point to Pipe Support
Attaches air terminals or conductors to pipe or handrails.
Strap Cable/Point Support
Masts
Aluminium Masts
Masts for cantilevered installations
ISOnV Masts and Accessories
For use with ISOnV Upper Mast Assembly in vertical cantilever installations. Accommodates up to five ISOnV Insulated Conductors.
Fiberglass Masts and Assemblies
Non-conductive mast section for air terminals using insulated down conductor.
Stainless Steel Masts and Components
Designed to mount Early Streamer Emitter air terminals. Mounts conventional air terminals with appropriate adaptor.
Mast Adaptors
nVent ERICO System 1000 Terminal Adaptors
Connects Early Streamer Emission Terminal to nVent ERICO Ericore upper termination.
nVent ERICO System 2000 Terminal Adaptors
Connects conventional air terminal to ER2 series Stainless Steel Mast.
nVent ERICO System 3000 Terminal Adaptors
Connects nVent ERICO System 3000 air terminals to ER stainless steel upper mast sections.
nVent ERICO System 2000 Terminal Adaptors
Mast Couplers, Supports & Bracket
Mast Coupler
Connects fiberglass mast to lower aluminum mast.
Mast Support
Used for cantilevered mounting of aluminum or stainless steel masts.
Mast Bracket, Offset
Used for cantilevered mounting of aluminum or stainless steel masts.
Mast Bracket, U-Bolt
U-Bolt assembly for attaching fiberglass mast to aluminum mast
Mast Bracket, X-Shape
For mast-to-mast or pipe-to-mast mounting connections.
Guy Ring
Allows guys to be attached between fiberglass mast and air terminal.
Non-Conductive Guy Kit
Guy wiring and hardware for supporting lightning protection masts.
Guy Ring
Wind Turbine Lightning Protection
Side Receptor Plug
A fully encapsulated connection from the conductor to the side receptor disk utilizing an engineered thermoplastic material. Offers excellent dielectric strength and a simple mounting method.
Tip Receptor Mount
A fully encapsulated connection from the down conductor to the tip receptor. Offers a standard, insulated connection with excellent dielectric strength for a removable tip receptor.
Side Receptor Socket
Mounting base for the side receptors plug that is built into the blade wall during the manufacturing process. The socket provides a consistent, engineered hole in the blade for the receptor disk.
Tip Receptor Disk
A field replaceable lightning attachment receptor that is resistant to environmental effects.
Side Receptor Installation Tool
Specially designed tool that makes installing the side receptor plug on the opposite side of the blade simple and efficient.
Tip Receptor Disk
A field replaceable lightning attachment receptor that is resistant to environmental effects.